Description

【Day and Night Temperature Controller】 Plug-and-play design, easy to use. This thermostat outlet plug can be connected to a heating or cooling device for temperature control. 3 modes: M1 temperature control mode, M2 temperature control with timer mode and M3 timer mode. Temperature control range:-40℃~120℃/-40℉~248℉. Time set: 0-24h/daily cycle. Convertible in Celsius and Fahrenheit. 【M2 mode for day night temperature control】 Choose this mode, the KT3200 day/night temperature controller thermostat can be set two different temperature zones with its function of dual time cycle setting during 24 hours according to the day and night. For example, you can set to keep the temperature of the reptile terrarium at 22~24 degrees from 10:00 to 17:00, and 24~26 degrees from 17:00 to 10:00 the next day, with just two time and two temperature range settings. 【M1 mode for Temperature control without timer】 If you wan to use this KT3200 Thermostat Outlet Plug for temperature control without timer function, choose M1 Temperature control mode. Just set start temperature and stop temperature, this temperature controller plug will work in heating or cooling mode as programmed. (start temperature > stop temperature, cooling; start temperature < stop temperature, heating). 【M3 mode-Timer function with 2 time period during 24 hours】 If you want to turn the device on at certain times of the day and off at other times, choose M3 Timer mode. For example, set Time 1 ON=8:00, Time 2 OFF=18:00, the device will be turned on during 8:00~18:00 and turned off during 18:00~8:00, then cycle every day. 【More features】 3m NTC 10K temperature sensor probe (Not recommended to be placed in water for more than 1 month). Temperature calibration. Reset function. All settings will be saved after power failure (Time clock data will be saved for 2 weeks, other settings can be saved permanently). Output: Max 15A/120V (The relay is max 15A. Please use resistance load less than 15A, inductive load less than 2A.)