Description
Main features : Plug and play design, easy to use; Dual relay output, be able to connect with refrigeration and heating equipment at the same time; Support reading with Centigrade or Fahrenheit unit; Maximum output load: 1000W(110V)/2000W(220V); Dual display window, be able to display measured temperature and set temperature at the same time; Temperature calibration; Compressor delay protection for refrigeration control; High and low temperature alarms are available; Over-temperature and sensor fault alarm; Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Specification: Temperature Control Mode :On/Off Control, Heating and Cooling Temperature Control Range : -50~99 °C / -58~210 ° F Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V ~240V AC Input Power Cable Length: 1.5m (5ft)Input Power Cable Length: 1.5m (5ft) Output Power Cable Length: 30cm (1ft) Buzzer Alarm: High and Low Temperature Alarm Sensor Type: NTC sensor (Including) Sensor Length: 2m / 6.56ft Relay Capacity: Cooling/ Heating (10A, 100-240VAC) Storage Temperature: -20~ 60 ° C / -4~ 140 ° F Storage Humidity: 20~85% (No Condensate) Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) Warranty: 1Year Package: 1 x Temperature controller with outlet, 1x 1.97" Female to Male NTC Sensor 1 x English Manual